Leighton, Clare, 1898-1989
Found in 24 Collections and/or Records:
Shipbuilding, [between 1949 and 1951]
Signed by Leighton. Labeled: Shipbuilding, 20/50.
Shipbuilding: Compositional Study [1] of 2, [between 1949 and 1951]
Circular drawing matted on board. Image is not identical to the final design (beams are at different angles, figures are missing). Under the board is a note reading "planked bottom to top, augur bits."
Shipbuilding: Compositional Study [2] of 2, [between 1949 and 1951]
Two compositional studies. The top is larger (34x33 cm) and more detailed. The bottom is in graphite and much smaller (14x16 cm). Both drawings are closer (but not identical) to the final image than Compositional Study [1], in that they display a tall, triangular scaffolding at the front of the hull.
Shipbuilding: Final Proof [1] of 1, [between 1949 and 1951]
Shipbuilding: Preliminary Study [1] of 7, [between 1949 and 1951]
List of tools, and sketches of an adze, augur (auger), caulking mallet(?), bevel and pitch pot.
Shipbuilding: Preliminary Study [2] of 7, [between 1949 and 1951]
Sketches of various tools, including a spike with a cord, bundle of cord, mallet, compass, stilts to support hull during construction, etc. Labeled "ship building" in upper left corner. Irregular piece cut from lower right corner.
Shipbuilding: Preliminary Study [3] of 7, [between 1949 and 1951]
Tape measure. Labeled "Donald McKay's tape line."
Shipbuilding: Preliminary Study [4] of 7, [between 1949 and 1951]
Mallet, plane, man wielding an adze, and other shipbuilding tools. The plane is marked "taller".
Shipbuilding: Preliminary Study [5] of 7, [between 1949 and 1951]
Three light sketches of compasses and one sketch of a tool used for measuring angles. Large portions of upper left and lower right corners cut away.
Shipbuilding: Preliminary Study [6] of 7, [between 1949 and 1951]
Three small compositional studies in graphite and pen and ink. Below, two sketches of ship's hull and one of a knee (tool). In the upper right-hand corner, a list of tools and Leighton's notes to herself on the composition of the image. Bottom left corner cut away, top of paper damaged.
Shipbuilding: Preliminary Study [7] of 7, [between 1949 and 1951]
Caulking iron, chisel and a third conical tool resembling a wooden peg. Also curved pieces of wood, a sketch of a ship in scaffolding, and a light circular drawing.
Shipbuilding: State 1, [between 1949 and 1951]
Numbered 1 in upper right corner.
Shipbuilding: State 2, [between 1949 and 1951]
Numbered 2 in upper right corner.
Shipbuilding: State 3, [between 1949 and 1951]
Numbered 3 in upper right corner.
Shipbuilding: State 4, [between 1949 and 1951]
Numbered 4 in upper right corner.
Shipbuilding: State 5, [between 1949 and 1951]
Numbered 5 in upper right corner.
Shipbuilding: State 6, [between 1949 and 1951]
Bottom right corner torn off.
Numbered 6 in upper right corner.
Shipbuilding: State 7, [between 1949 and 1951]
Numbered 7 in upper right corner.
Shipbuilding: State 8, [between 1949 and 1951]
Numbered 8 in upper right corner.
Shipbuilding: State 9, [between 1949 and 1951]
Numbered 9 in upper right corner.
Additional filters
- Subject
- Wood engravings 14
- Graphite drawings 9
- Queen's ware 1