Skip to main content Skip to search Skip to search results

Ice industry -- Pictorial works

 Subject
Subject Source: Local sources

Found in 20 Collections and/or Records:

Ice Cutting: Compositional Study [1] of 1, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Two compositional studies matted together on board. At top is a large circular drawing of the tool assembly on tracing paper taped over the bottom portion.
Dates: [between 1949 and 1951]

Ice Cutting: Preliminary Study [1] of 8, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Various large sketches of tools. Large sketch in the upper left is difficult to identify. Sketches at the bottom and to the right look similar; one is labeled "snow scraper." It is different from the scraper engraved in the foreground of the final image, in that this one has two short handles and its teeth seem to form a diamond-shape.
Dates: [between 1949 and 1951]

Ice Cutting: Preliminary Study [2] of 8, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: A torn, half-sheet of paper. The profile of a man with a hat, and a sketch of some sort of ice-spear.
Dates: [between 1949 and 1951]

Ice Cutting: Preliminary Study [3] of 8, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Sketch of two men cutting ice. The ice appears divided by parallel lines running from front to back, and the two men are cutting perpendicular to these lines.
Dates: [between 1949 and 1951]

Ice Cutting: Preliminary Study [4] of 8, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Sketch of two men cutting ice. One is seen in profile, with both hands pushing down on a long, toothy saw; behind him, a man leans towards the viewer, pushing down on two handlebars. A large rectangular ink-stain appears on the right side of the page.
Dates: [between 1949 and 1951]

Ice Cutting: Preliminary Study [5] of 8, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Three sketches of calipers, each open to a different width. Bottom corners of page are torn.
Dates: [between 1949 and 1951]

Ice Cutting: Preliminary Study [6] of 8, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Barn with a chute leaning down from the window on the building's left side. A few trees visible behind. Bottom right corner of page is cut away.
Dates: [between 1949 and 1951]

Ice Cutting: Preliminary Study [7] of 8, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Ice groover and ice saw. Sketches labeled "groover" and "saw" (the saw is incomplete).
Dates: [between 1949 and 1951]

Ice Cutting: Preliminary Study [8] of 8, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Five large sketches of tools, labeled "Ditching knife used in salt marshes," "broad axe," "beetle," "sheep shears," and "corn cutter" (?).
Dates: [between 1949 and 1951]

Ice Cutting: State 1, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Partial proof: the bottom foreground is left blank. Print quality is poor, speckled with white spots. No corrections appear.

Numbered 1 in upper right corner.
Dates: [between 1949 and 1951]

Ice Cutting: State 2, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Partial proof: the tool assembly in the foreground is left blank, and drawn in with graphite.

Numbered 2 in upper right corner.
Dates: [between 1949 and 1951]

Ice Cutting: State 3, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Two sheets glued together: the larger, bottom sheet is a partial proof, with the tool assembly drawn in with graphite. Above it is attached a print of the early stage of the tool assembly, aligned so that it fits almost seamlessly with the print below.

Numbered 3 in upper right corner.
Dates: [between 1949 and 1951]

Ice Cutting: State 4, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: First full proof in the series. The tool assembly in the foreground still in an early stage of detail.

Numbered 4 in upper right corner.
Dates: [between 1949 and 1951]

Ice Cutting: State 5, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Numbered 5 in upper right corner.
Dates: [between 1949 and 1951]

Ice Cutting: State 6, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Numbered 6 in upper right corner.
Dates: [between 1949 and 1951]

Ice Cutting: State 7, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Numbered 7 in upper right corner.
Dates: [between 1949 and 1951]

Ice Cutting: State 8, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Numbered 8 in upper right corner.
Dates: [between 1949 and 1951]

Ice Cutting: State 9, [between 1949 and 1951]

 Item — Oversize 1: Series 2, Folder: 4
Call Number: MSS 7, Series II
Scope and Contents: Numbered 9 in upper right corner. No corrections visible (may essentially be a final proof).
Dates: [between 1949 and 1951]

Clare Leighton collection

 Collection
Call Number: MSS 7
Overview: The collection comprises original artwork and manuscript material by Clare Leighton for a series of 12 Queen's ware plates representing New England industries, produced by Josiah Wedgwood & Sons in 1952.
Dates: 1949-1953